Make sure that 7-pin to 7-pin or the charging pile/box has no
abnormalities such as cracked housing, worn cable, rusted plug or
foreign object.
Do not charge when the connection of the charging connection device
becomes loose;
Make sure that there is no water or foreign object in the charging port,
and the metal terminal is not rusted or corroded;
If any of the above conditions occurs, charging is prohibited; otherwise, it
may cause short circuit or electric shock, resulting in personal injury.
■ Connecting power supply port:
If the charging box delivered with the vehicle is used to charge the
vehicle, this step can be omitted.
If an AC charging pile equipped with a charging plug is used to charge
the vehicle, this step can be omitted.
If a single-phase AC charging pile not equipped with a charging plug is
used to charge the vehicle, the 7-pin to 7-pin equipment should be used.
To use the equipment, connect the power supply plug to the power
supply socket on the charging pile.
■ Connecting vehicle charging port:
Connect the charging plug of the charging equipment to the charging
port of the vehicle and lock it securely.
■ Charging setting:
For the single-phase AC charging box or public AC charging pile without
setting options, this step can be omitted.
For public AC charging pile/box with setting options, to use it, swipe your
card or scan the QR code on it. For specific operation, refer to the
charging pile/box instructions.
■ The charging plug connected indicator on the combination instrument or
multimedia system will illuminate.
■ In the charging process, relevant charging parameters and charging animation
will be displayed on the combination instrument.
In this condition, preset charging can be set via the multimedia system.
Refer to setting procedure of preset charging function for details.
3. Guidance on stopping charging
■ End charging:
The charging equipment can be set to end charging in advance or end
charging automatically when the vehicle is fully charged.
■ Disconnect the charging port connection:
Disconnect the charging port with reference to AC charging with
household portable equipment.
■ Disconnect the power supply plug:
If the 7-pin to 7-pin equipment is used for charging, it is recommended to
pull out the charging plug before pulling out the power supply plug.
If the charging box is used to charge the vehicle, this step can be
omitted.
To Next Page
