BYD e2 - Page 100

4
Use and drive
4 -1 Charging and discharging descriptions
99
Multimedia control (If fitted)
■ Turn on the “Settings - Vehicle” on the
multimedia.
■ Enter the “Charging coupler anti-theft
setting” and select the electric lock
working mode as “ON”.
Dashboard control (If fitted)
■ Open the dashboard menu and select
“Personalize” setting;
■
Enter the “Charging coupler electric
lock working mode setting” and select
the electric lock working mode as “ON".
Tip
Under both “ON” and “OFF” modes, the charger is under locked status during the
charging. In such case, the charger is locked. The user can unlock by following methods:

Press the smart key button to unlock it (During charging at OFF position);

Press the micro switch next to the main driver door handle to unlock it (With the
presence of key).

Press the window control switch beneath the driver door window to unlock.
Note

After the charger is unlocked, the charger can be unplugged within 30s. After 30s,
the electric lock is locked again.

After the power battery is fully charged, in the “Disable - Antitheft” mode, the electric
lock will be automatically unlocked; in the “Enable Anti-theft” mode, the electric lock
must be unlocked manually as described above.
Southeast
Standard feedback
Automatic locking before driving (activated)
Remote unlocking mode (driver side alone)
Setting of electric locker work mode for
charger (activated)
288880km of total mileage
Vehicle
Driving
Lighting
Sound
effect
System
A/C
Lock
Lock
Automatic locking up before driving
ON
OFF
Remote unlocking mode
Driver side alone
Four-door
Electric locker anti-theft work mode
for charger
ON
OFF
Settings
Front
ON
High convenience
Information
Return
Volume
Default value
Altitude 54m
Slope
0°