4
Use and drive
Gearshift control mechanism (If fitted)
The gear indicator is located on the knob type electronic gearshift panel.
Configuration 1
Configuration 2
■ Gear P is the parking gear. Press the gearshift knob button to realize parking. The
indicator lamp on the button turns on. Shift to this gear before starting or stopping the
vehicle. Depress the brake pedal to start the vehicle and then shift from gear P to other
gear (If fitted).
Note
●
To prevent damaging the transmission, ensure to press the “P” button only
after the vehicle is completely stopped.
■ “R” is the reverse position and can be used after the car is parked completely.
■ Gear N: Neutral gear, used for temporary stop of vehicle. Ensure to shift to parking gear
before getting off the vehicle for whatever purpose.
■ “D” is the driving position, and can be used during normal driving process.
To Next Page
Loading...
