BYD e2 - Remote Start Function

114
4-4 Start and drive
Remote start function
1. Turn the power switch in “OFF” position.
2. The knob is at “N” with effective parking signal or is at “P” (If fitted).
Remote start
■ Press and hold the “Start/Stop” button
on the intelligent key for 2s to start the
vehicle. After the successful start of
vehicle, the turn signal lamps flash for
three times.
■ After the remote start is successful, if
no valid operation is performed within
10min, the car will be shutdown, the
power switch will be turned to “OFF”
position, and the turn signal will flash
twice;
■ After successful start, press and hold “Start/Stop” button on the electronic remote key
for 2s, the car will be shutdown, the power switch will be turned to “OFF” position, and
the turn signal will flash twice.