EasyManua.ls Logo

BYD e2 - Driver Interface and Controls

BYD e2
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
1-4 Anti-theft system
1-4 Anti-theft sys tem
Anti-theft system
With the vehicle anti-theft system activated,
if any door is opened, the system will issue
a warning tone and the turn signal lamps will
flash to prevent the anti-theft of vehicle.
System settings
1. Turn the power supply switch to “OFF”
position.
2. Let all passengers get off.
3. All doors will be locked. All doors will be locked. When all doors are locked, the
anti-theft system will be automatically activated in 10s after the turn-on of anti-theft
indicator lamp. After the system is activated, the anti-theft indicator lamp will start
flashing.
4. Ensure that the anti-theft indicator lamp starts flashing before leaving the vehicle. As
unlocking the door from the inside will trigger this system, it’s prohibited to leave any
person in the vehicle while activating this system.
Trigger alarm
The system will send an alarm in following cases:
Any door is unlocked/opened or the front hood or liftgate is opened without using
the intelligent key entry function.
When the smart key activation function is not used but the car is powered up.
Cancel alarm
The alarm can stop in the following ways:
The door or liftgate is unlocked by wireless remote control.
Unlock the doors with the micro switch.
Press “Start/Stop” button of the key in the car.
Warning
Do not modify the anti-theft system in modification or addition way. Such changes
may result in the system fault.

Table of Contents

Related product manuals