BYD e2 - Function Definition (if Fitted)

5
Interior device
5-2 Air conditioning system
153
Tip

A/C abnormal smell symptom:

Upon the turn-on of A/C, the airflow outputted by the A/C probably contains a
moist and moldy smell. It’s a normal symptom that the A/C outputs an abnormal
smell. During the working of A/C, the evaporator will be easily adhered with A/C
condensates and the wet evaporator will also be easily adhered with the
non-filtered passenger sweats and dusts. If the condensates on the evaporator
are not blown dry, the molds will easily breed on the dark and moist evaporator
surfaces and the long-time fermentation of molds will easily generate abnormal
smell.

Method for prevention of A/C abnormal smell:

Before stopping the vehicle, turn off the A/C and run under ventilation mode to
maintain relatively dry.

Periodically check, clean, or replace filter screen.

Keep the inside of vehicle compartment clean and fresh.

If the abnormal smell is always present after taking the method for prevention of
abnormal swell, it’s recommended to contact a BYD Auto Authorized Service Station
for repairs.
Function definition (If fitted)
A/C ON/OFF button

Press the A/C Off/On the button or the on the A/C operation panel
to turn
off the A/C. The air vent mode remains unchanged and the recirculation mode is the
internal recirculation mode. Press this button again or press the on the A/C
operation interface
to turn on the A/C.

Under the A/C OFF status, press the A/C button again or press the on the A/C
operation interface
to turn on the A/C and run the A/C under the temperature,
fan speed, and air vent mode of last turn-off.
Air volume adjustment

Press the appropriate fan speed level to set the fan speed at desired speed. The
higher the level is, the higher the fan speed is and the higher the inputted airflow is.

Press the button or the on the A/C operation panel
to turn off the A/C
system.
ON/
OFF
ON/
OFF
ON/
OFF
ON/
OFF
ON/OFF
ON
OFF
OFF