Sound-light seat belt reminder function:
If the driver seat belt is not fastened after the start of engine, the sound-light warning
system will start working, until the driver seat belt is fastened.
Tip
● If the above functions are abnormal or invalid, it is recommended to contact BYD
Auto Authorized Service Station immediately. Do not use the appropriate seat until
the functions are recovered.
Use of seatbelt
1. Adjust the seat to the proper position and adjust the backrest to the proper
angle.(Refer to 3- Controller operation - Seat adjustment)
2.
Stretch the shoulder belt to cross
obliquely over the shoulder, but do not
touch the neck or slip it from the
shoulder. Cross the waist belt over the
hip as low as possible.
3. Insert the latch into the buckle until a
click is heard, and pull the latch in the
opposite direction to confirm that the
seatbelt is locked successfully. Note
that the seatbelt cannot be twisted.
Tighten the slack section
Keep it as low as possible to the hip
To Next Page
Loading...
