EasyManua.ls Logo

BYD e2 - Clean the Car

BYD e2
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
174
6-2 Regular maintenance
Note
If the car is repainted and parked in a high temperature painting and waxing
workshop, must remove the plastic bumper to avoid its damage at high temperature.
Clean the car
In the following cases, the paint layer may be peeled off or the body and parts may be
corroded; therefore, the car should be cleaned in time:
When driving along the coast.
When driving on roads paved with antifreeze.
When driving on roads sticked with coal tar.
When resins, bird droppings and insect corpses are sticked on the car.
When driving in areas containing a lot of soot, coal ash, dust, irons or chemicals.
When the car is soiled by dust and mud.
After the rain.
Wash the car manually
Park the car in a shade place for full cooling and then wash the car.
1. Rinse the loose dirt and all mud or road salts on the bottom and in the wheel recesses
of the car with a water pipe.
2. Wash the body with a neutral washing agent, the washing agent should be prepared
according to the manufacturer instructions. Wipe the body gently from top to bottom in
the direction of the water flow with a soft cloth immersed with the cleaning solution; do
not circle and wipe the body horizontally.
3. Must rinse the body fully; otherwise, the dried washing agent will form some spots.
After washing the car in hot weather, all parts must be rinsed with clean water.
4. To prevent water marks, wipe the body with a clean soft towel; do not wipe or press
the body forcedly; otherwise it will scratch the painted surface.

Table of Contents

Related product manuals