Parking brake pedal (If fitted)
■ Operations of parking brake: After the
stop of vehicle, depress and hold the
brake pedal by right foot to keep the
vehicle stationary, shift the gearshift
knob to “N”, and then depress the
parking brake pedal to the end by left
foot. After the steady parking of the
vehicle is confirmed, release the right
brake pedal. In such case, the parking
indicator lamp
turns on.
■ Release of parking brake: Depress the brake pedal by right foot to prevent vehicle
gliding and depress the parking brake pedal forcibly by left foot and then release to
restore the parking brake pedal to initial position. The instrument icon of parking brake
indicator lamp disappears and the parking brake is released.
Note
● Whenever the parking brake is depressed or released, ensure to wait for the parking
brake pedal to restore initial position before operations.
● It’s prohibited to depress the parking brake pedal during the normal driving of
vehicle.
● The parking of vehicle on a slope shall be completed as per above-mentioned
application of parking brake. It’s prohibited to complete the application of parking
brake in gear “D”.
Auto Hold (AVH) (If fitted)
AVH is the Auto Hold function used to hold the vehicle stationary for the working conditions
in which the vehicle is waiting for a period under stationary status, such as crowded traffic
condition on a slope and waiting for lights. Provided that the Auto Hold ready condition is
met, depress and hold the brake pedal till the vehicle stops completely (0 vehicle speed) to
activate the AVH function.
To Next Page
Loading...
