Emergency warning indicator switch
Press the hazard warning lamp switch to
flash all turn signal lamps and synchronously
flash the turn signal indicator lamps on the
instrument and the indicator lamp on the
hazard warning lamp switch. The hazard
warning lamp switch is a self-resetting
switch. Press the hazard warning lamp
switch again to stop the flashing.
Mileage switchover switch
■ Press the “Mileage switchover" switch
to switch over “Total mileage” - “Mileage
I” - “Mileage II” - “Total mileage”. At the
same time,
the corresponding
information switchover status is
displayed on the instrument.
■ Press and hold “Mileage I” or “Mileage
II” to reset the mileage information.
Lighting adjustment switch group
The lighting adjustment switch group is
composed of headlamp adjustment switch.
Headlamp adjustment switch
■ This switch is used to adjust the vertical
illumination angle of the headlamp. This
switch is operational after the low beam
is turned on.
To Next Page
Loading...
