EasyManua.ls Logo

BYD e2 - Wiper

BYD e2
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
144
4-6 Other main function descriptions
Tip
Do not adjust the exterior rearview mirror while the car is running. Otherwise, it may
cause the driver to misoperate the car, resulting in an accident.
Running the electric heater/defroster function of rearview mirror for a long time will
probably result in earlier aging of mirror face. Please timely turn off the defroster
button whenever there is no need.
Wiper
Check the blade status of front wiper and rear wiper (If fitted) and check the rubber for
cracking and partial hardening once every 6 months or 10,000km. Upon detection of such
symptoms, replace the wiper blades, otherwise the wiping stripes or the unclean areas will
be left during wiping.
Note
Do not open the engine hood when the wiper arm is pulled up; otherwise, the engine
hood and the wiper arm will be damaged.
Replacement of wiper blades
1. Rotate the wiper blade for 45˚, till the
wiper is not on one same line with the
wiper hook, and detach the wiper blade
from the hook.
2. Press the spring plate shown in the
diagram and at the same time push
outward the wiper blade.

Table of Contents

Related product manuals