BYD e2 - Indoor Light Switch (if Fitted)

80
3-4 Switch
Indoor light switch (If fitted)
Configuration 1
Under any power switch position, touching
the face mask of front interior lamp can turn
on the front interior lamp.
Configuration 2
■
Touch the face mask of left/right
reading lamp to turn on the interior
lamp.
■ Touch the face mask of reading lamp
again to turn off the interior lamp.
Tip

The multimedia includes a “Door switch”. With the “Door switch” at ON status, the
interior lamp turns on in low intensity when any door is opened. Touch the face
mask of interior lamp to switch over the interior lamp to high intensity mode and
touch it again to switch over to low intensity mode. (PAD configuration)

The "Door switch” is under normally-ON position by default and can’t be turned off.
The interior lamp turns on in low intensity when any door is opened. Touch the face
mask of interior lamp to switch over the interior lamp to high intensity mode and
touch it again to switch over to low intensity mode.(Radio configuration)

Under the “Door” mode, the interior lamp turns on for 15s and then turns off after all
doors are closed with power switch at “OFF” and turns on for 2s and then turns off
after all doors are closed with power switch at “ON”.