3-2 Seat
Seat notices
During driving process all passengers in the car must maintain the seat backrest upward,
their backs against the seat backrests and wear the seatbelts properly.
Warning
● Do not drive the car until all passengers are seated properly.
● Do not sit on the folded seat backrest, in the luggage compartment or on the
luggage. Otherwise, In case of an emergency brake or a collision, any passenger
who is not seated correctly in the seat or does not wear the seatbelt normally may
be seriously injured.
● Do not allow the passenger to stand up or move between the seats during driving
process. Otherwise, the passenger may be seriously injured in case of an
emergency braking or a collision.
Notes on seat adjustment:
Adjust the driver's seat so that the foot pedal, the steering wheel and the dashboard
controller are all within the easy control range of the driver.
Tip
● The driver seat cannot be adjusted during driving process, so as to prevent the lose
control of the car from its uncontrollable movement.
● When the seat is adjusted, it cannot hit any passenger or luggage.
● After the front and rear position of the seat is adjusted manually, must ensure that
the seat is locked by moving it back and forth.
● After the seat backrest is adjusted, must lean back on the body to confirm that the
seat backrest is locked.
● Do not place any object under the seat; order to affect the seat lock mechanism or
accidentally push the seat position adjustment lever upward, resulting in the sudden
seat movement and the lose control of the car.
● When the seat is adjusted, do not put the hand under the seat or near the operating
parts the order to fingers may be crushed.
● When the seat cushion depth is measured, the front and rear position of the seat is
the limit positions of the slide rail, and the backrest has the design angle of 25°.
To Next Page
Loading...
