BYD e2 - Clean the Inside of the Car

6
Maintenance
6-2 Regular maintenance
175
Tip
●
Do not use alkaline washing powder, soapy water, washing agent, dewaxing
detergent, organic matter (gasoline, kerosene, volatile oil or strong solvent).
● When cleaning the combination lights, do not wipe the surface of the combination
lights with chemical solvents, such as, gasoline, alcohol, banana water, thinner or
carbon tetrachloride; otherwise, it may cause cracks on the combination light
housing.
● The car driven in coastal areas or in heavily polluted areas should be rinsed once
every day.
● Do not scrape the body dirt by a knife or remove the body dirt by gasoline, as the
plastic wheel trim parts are vulnerable to damage by organic matter. If any organic
matter is splashed on the decoration piece, must wash it off with water and check it
for damage; if necessary, please replace the plastic wheel decoration piece that has
been seriously damaged in time, otherwise it may be thrown off during driving
process, resulting in an accident.
● Do not wash the bumper with a cleaning agent containing abrasives.
● The plated metal parts must be cleaned with carbon cleaning agent, and waxed
regularly.
Wash the car automatically
When washing the car at the automatic washing station, it must be noted that certain types
of brushes, unfiltered rinsing water or machine-specific flushing procedures may scratch
the painted surface. If the painted surface is scratched, the durability and gloss of the
painted surface will be reduced, especially for dark cars. It is recommended to consult the
staff at the washing station before washing to define safest washing procedure for the
painted surface.
Clean the inside of the car
Tip
● When washing the inside or outside of the car, do not allow the water to flow directly
onto the dashboard or the floor; otherwise, the water entered in the nearby electrical
components may cause a fault.
● Do not clean the vehicle floor by water, in order to prevent body corrosion.