4
Use and drive
Press the Auto Hold switch to activate the
Auto Hold.
Note
● Depressing the accelerator pedal, shifting to “P”, or applying the EPB can deactivate
the Auto Hold and return to the Auto Hold ready status.
● The Auto Hold will be deactivated also if the Auto Hold ready condition is not met.
Preconditions for ready
status of Auto Hold (All conditions must
be met)
Under the AVH activated status:
■ The driver seat belt is fastened.
■ The driver door is closed.
■ The vehicle is started.
■ The ESP and EPB are free of malfunction.
Note
● The Auto Hold function is under OFF status by default upon power-on. Once
activated manually, the Auto Hold enters ready status and the indicator lamp
is displayed in white on the instrument.
To Next Page
Loading...
