4-5 Driving assistance function
Reversing image
■ The three lines in the image are the
reverse safety lines.
● Red: within about 0~0.5m
● Yellow: within about 0.5~1m
● Green: within about 1~3m
■ The area displayed is based on the car
direction and the road conditions.
■ This system is only functioned to assist the parking. Do not excessively rely on this
system. Ensure a sufficient space before reversing.
Tip
● The reversing safety lines are only used to provide the distance reference for the car
under no-load conditions.
Note
● The sensor may not detect any obstacle that is closer to the car.
● The sensor test range may vary with the shape of the obstacle.
Detection information of sensors
■ Some car conditions and surrounding conditions may affect the sensor ability to
accurately detect the obstacles. The specific conditions that may have influence are
listed as below:
● There is dirt, water or fog on the sensor;
● The sensor is frozen;
● The sensor is covered;
● The car is obviously tilted;
● The car is driven on particularly bumpy roads, slopes, gravel or grass roads;
Reversing image; please check the
surroundings to ensure the safety
To Next Page
Loading...
