EasyManua.ls Logo

BYD e2 - Page 134

BYD e2
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Use and drive
4-5 Driving assistance function
133
Warning (continued)
Under specific conditions (Such as Sport mode, winter, and soft road condition), the
display of the tire inflation pressure control will probably be delayed.
The use of tires with disqualified air pressure will probably result in accident and tire
damage. The driver is liable to maintaining correct inflation pressure for all tires.
Therefore, before driving, ensure to inflate all tires to correct air pressure. The
specified tire pressure is listed on the tire pressure label. The tire pressure
monitoring system is functional only the pressure of the cold state tires is correct.
If the indicator lamp
on the display screen turns on, immediately park the
vehicle in a safe place and check all tires and the tire pressure. While parking the
vehicle, notice the safety and avoid fierce steering/braking operations.
Tip
The tire pressure monitoring system can identify the under-pressure tire. If the
under-pressure is alarmed for one tire, besides the checking of the alarmed tire and
the tire pressure, check the non-alarmed tires as well.
The tire pressure monitoring system will probably alarm in event of following conditions:
Manual change of tire pressure.
Under-pressure for one or more tires.
Structural damage of tire.
Replacement of one wheel each for front and rear shafts.
Non-reset of tire pressure monitoring system after replacement of tire or change of
tire pressure.
One-sided heavy load of vehicle.
Excessive load (Such as full-load) on wheels of certain shaft.
Installation of tire chain.
Installation of spare wheel.

Table of Contents

Related product manuals