Micro switch lock/unlock
Lock:
■ When the vehicle is under unlocked
status and all doors are closed, carry a
valid intelligent key and slowly and
firmly press the “micro-switch” button
on the outer door handle or liftgate. All
doors will be locked simultaneously
and the turn signal lamps will flash
once.
■ When the power switch is in “OFF”
position. Pressing the micro-switch
can’t lock the vehicle.
Unlock:
■ When the vehicle is under locked status, carry a valid intelligent key and slowly and
firmly press the “micro-switch” button on the outer door handle or liftgate. All doors will
be unlocked and the turn signal lamps will flash twice.
■ After using the unlock function, any door can be opened within 30s. Otherwise, all
doors will be re-locked automatically.
● When the doors are unlocked with the smart access and start system, must check
the doors for locking before pulling the door handle.
In the following cases, the doors will not be unlocked/ locked by
pressing the micro switch button:
● When any door is opened or closed and at the same time the micro switch button
is pressed.
● When the power switch is in “OFF” position.
● When the key is left in the car.
Tip
● If the smart key is too close to the outer door handle or the window, the access
function may not be activated.
To Next Page
Loading...
