Tip
The intelligent entry and start function probably can’t work normally under following
conditions:
● Presence of strong electromagnetic wave emitting facility nearby, such as television
tower, power generation station, and broadcasting station.
● Carrying of intelligent key along with communication device such as interphone and
mobile phone.
● When the smart key is in contact with or covered by a metal object.
● Quick operation of door handle.
● When the smart key is close to the door handle.
● Low battery power level.
● The smart key is close to a high voltage device or a device that generates a noise.
● When the smart key is carried along with another car`s smart access and start system
key or any other device that generates a radio wave.
● Even within the triggering range, the intelligent key probably can’t work normally at
some positions (Such as on instrument panel, in glovebox, and on floor).
Depletion of intelligent key battery power
If the electronic smart key indicator does not flash and the car cannot be started with the
start function, the battery may be exhausted and should be replaced as soon as possible.
Saving of battery power
■ The key communicates with the vehicle, even if the vehicle is not driven. Therefore, do
not leave the key within the vehicle or within 2m reach to the vehicle.
■ To re-activate the intelligent entry and start system, please use any of following
operation methods:
● The driver carrying the electronic smart key presses the micro switch on the front
outer door handle.
● Perform the wireless remote operation.
■ If the smart key receives strong electromagnetic waves for a long time, the battery
power will be exhausted. The smart key must be at least 1m away from the following
devices:
● TV
● PC
To Next Page
Loading...
