3
Controller Operations
Remove the headrest
Press and hold the headrest height adjustment button, remove the headrest, and release
the button.
Install the headrest
Insert the head restraint rods into the bushings and face towards their grooves. press the
headrest height adjustment button to lower the headrest to the appropriate position, release
the button, pull up the headrest a small amount and release it after a lock sound is heard.
Tip
● To prevent neck harms and other head harms, ensure that the height of head
restraint is level with the top of your ears during adjustment.
● After adjustment of head restraint, push down the head restraint to ensure that the
head restraint is at locking position.
● Do not drive the vehicle without head restraints.
● Do not affix any object to the head restraint rods.
To Next Page
Loading...
