4
Use and drive
4 -1 Charging and discharging descriptions
Tip
● Please contact BYD Auto Authorized Service Station or local electrician to select the
appropriate power supply according to the requirements of the charge device.
● Grounding description of charging equipment: The device must be well grounded. If
the charge device is faulty or damaged, the grounding wire can provide the circuit
discharge with minimum impedance to reduce the risk of electric shock. The device
is provided with a grounding wire to connect the device grounding point and the
grounding point of the power supply plug. The plug must be matched with a
properly-installed and well-grounded electrical outlet.
Note
● During charging, do not wind up the charging connecting wires, otherwise the heat
dissipation will be impaired.
● Please refer to the charging instructions for the detailed charging precautions.
Warning
● Please refer to the charging safety warnings in the charging instructions for the
detailed charging safety warnings.
● The maximum working environment temperature is 50
℃
. When not in use, please
store this product in a cool and dry place.
● During charging, it’s prohibited to place the equipment in the trunk, beneath the
vehicle head, or near the tires.
● During use, avoid the vehicle rolling, falloff, and manual treading.
● It’s prohibited to fall off or directly pull the cables for movement of this equipment.
Handle with care during movement.
● It’s prohibited to refit, disassemble, or repair the charging equipment or related
ports.
● It’s not recommended to use any additional wire or adapter. If the use of additional
adapter is required, please use the wires of appropriate wire diameter (≥1.5mm
2
wires) and ensure that the adapter parameters meet the specification.
● It’s prohibited to use this charging equipment whenever the household power socket
wires are softened or the charger cables are worn or their insulation layers are
cracked or otherwise damaged.
● It’s prohibited to use this equipment whenever the charger, power plug, or power
socket is disconnected or cracked or its surface is damaged.
To Next Page
Loading...
