4
Use and drive
4 -1 Charging and discharging descriptions
■ Connection of vehicle coupler:
●
three-to-
charging coupler and lock reliably.
● Securely connect the charger. The
charging connection indicator lamp
on the combination instrument
turns on. The charging indicator
lamp of three-to-
flashes (in green).
■ During charge, the relevant charge parameters and the charge image will be displayed
on the instrument.
● In such case, the reserved charging can be set up on the instrument. For detailed
setup procedure, refer to reserved charging functional setting on the combination
instrument.
3. Operation instructions for stop of charging
■ End of charging:
● The charging will be ended automatically when the power battery is fully charged.
● To end the charging in advance, directly proceed to next step.
■ Disconnection of charging coupler:
● If the working mode of the electric
lock is “Anti-
directly push down the mechanical
button of charger and pull out the
charger.
● If the working mode of electric lock
is “Anti-theft ON” mode, press the
unlocking button of the key or the
micro-switch on the door handle
(with the presence of key), push
down the mechanical button of
charger, and pull out the charger.
To Next Page
Loading...
