ENGINEERING MANUAL • Approved Document No. DFU5010000 Rev 4 • Page 15 of 48
CAST XFP 16 ZONE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
Button controls
More Information Displays additional information on any fire or fault conditions that appear on
the panel’s display. Will also display additional context dependent information
where appropriate.
(Scroll Up)
5 1 Dependent on the status of the panel, these two buttons:
(Scroll Down)
6 3 • scroll vertically through any fire/fault/disablements/test conditions on the
panel’s display
• scroll vertically through the panel’s user menus
• manipulate date, time and disablement settings, etc.
• select Yes/No in the panel’s menu options
• serve as code input buttons to access levels 2 or 3.
Accept
4 2 Dependent on the status of the panel, these two buttons:
Escape
3 4 • scroll horizontally through the panel’s user menus
• escape or accept options in the panel’s user menus
• serve as code input buttons to access levels 2 or 3.
Menu Provides access to the panel’s menus
Silence Internal Sounder Silences the panel’s internal sounder (also serves as a code input button when
performing a clean start, see page 33)
Control Panel Reset Resets the panel when the sounders are silenced (access levels 2 & 3 only)
Silence / Resound Sounders Silences or resounds the system’s sounders (access levels 2 & 3 only)
Investigate Starts the panel’s investigate timer function (access levels 2 & 3 only)
Keyswitch control
Turning the keyswitch to the armed position ‘I’ gives the user instant access to
access level 2 (authorised user level). The key is non-removable in position ‘I’.
To Next Page
Loading...
Need help?
General
