CAB EOS1 - Cleaning or Replacing the Print Roller

24
25
The Status print contains the following information :
Symbol Information
• Date and time of the printout
• Device type
• Version and creation date of the rmware
• Serial number of the PCB CPU
Current values of selected local settings  "4.1.1" on page 11.
Current values of selected machine parameters  "4.1.2" on page 12.
Current values of selected print parameters  "4.1.3" on page 13.
Current values of selected interface parameters  "4.1.4" on page 15.
Status of PIN activation  "4.1.6" on page 16.
• Operative time
• Number of labels printed
• Printed length with thermal transfer printing and thermal direct printing
Table 11 Information in Status print
5 Test Functions