6 6
2 Tools
Do not use any worn of damaged tools.
Only use tools and testing devices that are suitable for the task at hand.
cab special tools:
• Test collar for transfer ribbon winder (cab Part-No. 5534199)
• Distance caliber 0,1 mm (cab Part-No. 5961064)
• Gauge for brake adjustment at the label unwinder (cab Part-No. 5961092)
Standard tools:
• Screw driver Torx, size TX 10, TX 20
• Allen key 1,5 mm
• Phillips-head screwdriver, size 1
• Allen key 2,5 mm (included)
• Snap ring pliers ZGG 0
• Snap ring pliers ZGG 1
• Cylindrical dynamometer (spring scale), 0 - 10 N
• Cylindrical dynamometer (spring scale), 0 - 25 N
• Digital Circuit Analyzer
To Next Page
