CAB MACH4 Service Manual

6 6
2 Replacing Assembly Units
2.1 Device Overview
A
1 2 3 4 5 6 7 8
9
10
11
13
141516
12
View A
Fig. 1 Overview
1 RS-232 serial interface
2 USB 2.0 High Speed Slave interface
3 Two USB master interfaces for keyboard and
scanner
4 Ethernet 10/10 Base T interface
5 CompactFlash card slot
6 Power supply socket
7 PC card slot, type II
8 Power switch
9 Cover
10 Roll hub
11 Holder slots
12 Ribbon rewind hub
13 Printhead mounting with printhead
14 Release button of the print module
15 Pressure roller
16 Control panel

CAB MACH4 Specifications

General

Print Technology	Thermal transfer
Print Resolution	300 dpi
Max Print Width	104 mm
Power Supply	100 - 240 V AC, 50/60 Hz
Display	LCD with backlight
Interfaces	USB, Ethernet
Label Width Range	25 mm - 116 mm
Supported Barcode Types	Data Matrix, QR Code
Supported Operating Systems	Windows, Linux