CAB MACH4 - Unpacking and Installing the Device; Connecting the Device

6
7
2 Replacing Assembly Units
2.2 Tools
Do not use any worn of damaged tools.
Only use tools and testing devices that are suitable for the task at hand.
cab special tools:
Tape holder test collar (cab item number: 5540932)
Cylindrical dynamometer (spring scale), 0 - 10 N (cab item number: 5906108)
Standard tools:
Screw driver Torx, size TX 10/200
Hex screwdriver, straight, size 2.5
Screwdriver with at blade, size 4
Flat-nose pliers
•
•
•
•
•
•
•
•