CAB PX Series User Manual

Made in Germany
Operator's Manual
PX
Print Module

CAB PX Series Specifications

General

Brand	CAB
Model	PX Series
Category	Control Unit
Language	English

Summary

Introduction

Intended Use

Safety Instructions

Critical guidelines for safe electrical connection, environmental conditions, and handling to prevent hazards.

Installation

Connecting to the Power Supply

Instructions for safely connecting the print module to a grounded power source.

Connecting to a Computer or Computer Network

Loading Material

Loading Labels

Step-by-step instructions for correctly loading label rolls into the print module.

Setting the Label Sensor

Guide on adjusting the label sensor for accurate detection of label gaps or marks.

Setting the Head Locking System

Loading Transfer Ribbon

Detailed procedure for loading the transfer ribbon for thermal transfer printing applications.

Setting the Feed Path of the Transfer Ribbon

Printing Operation

Printhead Protection

Synchronization of the Paper Feed

Printing

Overview of initiating the printing process via data interface or external signals.

Cleaning

Cleaning Information

Cleaning the Rollers

Cleaning the Printhead

Detailed instructions for safely cleaning the printhead to ensure optimal performance.

Fault Correction

Types of Errors

Problem Solution

Provides common problems, their causes, and recommended solutions for troubleshooting.

Error Messages and Fault Correction

Lists specific error messages and detailed steps for their resolution.