26 26
10 Licences
10.1 Declaration of Incorporation
cab Produkttechnik
GmbH & Co KG
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Germany
Declaration of Incorporation
We declare herewith that the following „partly completed machinery“ as a result of design, construction and the version
put in circulation complies with the essential requirements of the Directive 2006/42/EC on machinery :
Annex I, Article 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.4.1, 1.3.2, 1.5.1, 1.5.2, 1.5.8, 1.6.3, 1.7
In the event of any alteration which has not been approved by us being made to any device as designated below, this
statement shall thereby be made invalid.
Device: Print Module
Type: PX
Applied EC Regulations and Norms:
Directive 2006/42/EC on machinery
• EN ISO 12100:2010
• EN ISO 13857:2008
• EN 349:1993+A1:2008
• EN ISO 13849-1:2015
• EN 60950-1:2006
+A11:2009+A12:2011+A1:2010+A2:2013
Personauthorisedtocompilethetechnicalle: Erwin Fascher
Am Unterwege 18/20
99610 Sömmerda
Signed for, and on behalf of the Manufacturer :
cab Produkttechnik Sömmerda
Gesellschaft für Computer-
und Automationsbausteine mbH
99610 Sömmerda
Sömmerda, 05.10.2016
Erwin Fascher
Managing Director
Start-up is forbidden until determined that the machine, into which the incomplete machine is to be built corresponds to
the regulations of the machine directive.
The documents according annex VII part B from the incomplete machinery are created and will commit to state agencies
on request in electronic kinds.
To Next Page
Loading...
Need help?
General
