©2021 CAE 905K720652 v1.0 29
Setup
Step 1. Remove Equipment from Boxes
Tools required:
• Drill with 2” Torx T25 drill bits - needed to open shipping crate
• Box Knife - suggested for opening cardboard boxes
• Phillips Head screwdriver (included) - used for installation of equipment.
WARNING: Be careful if using knives to open boxes, to prevent personal injury or damage to
equipment.
1. The Medical cart will arrive in a shipping crate. When the crate is opened, there is a side
panel on hinges. The hinged panel will function as a ramp which may be used to wheel the
medical cart out of the crate.
2. Additional equipment is shipped in cardboard boxes. Open the boxes. Do not remove the
monitors from the boxes until after attaching the VESA monitor mounts to the monitors
(see Step 2 Attach Monitors to Cart).
To Next Page
Loading...
