©2021 CAE 905K720652 v1.0 9
CAUTIONS AND WARNINGS
Please read and understand these cautions and warnings before you begin using SimEquip.
General
• When unpacking equipment for the first time, use box cutters carefully to protect both the
packaging and the product.
• Be careful when unpacking the Medical Cart. There may be sharp metal corners and
edges.
• Do not use equipment in a manner that is not specified by the manufacturer.
• Keep all electronic equipment free from high humidity or liquids.
• Do not leave the hardware powered on when the simulator is not in use.
Operations
• When using the medical cart, always ensure the computer and monitor are plugged into a
power source during simulator operation.
• Do not use or connect any USB device or cable to the devices other than the those
provided.
• When installing equipment near an electric outlet, ensure cables do not represent a
hazard.
• Allow for plenty of room when setting up the medical cart and accessories. There will be
cords, cables and hoses used that may present tripping hazards. The power cord will be 6’
or 7’ long (depending upon the country). During assembly, keep the long power cord
around the metal wrap attached to the power bar box.
• Avoid weighing down the equipment with any tools or accessories not relevant to the
immediate exercise.
• Refrain from bending, kinking, or stepping on breathing tubes and medical hoses.
• Be aware and avoid people when maneuvering the equipment on the medical cart.
Injuries may occur.
• Injuries may occur if the monitors and/or the cart falls or tips over.
• Always lock the caster wheels on the medical cart to ensure stability during setup and
operations.
• NEVER attach medical gas hoses to real gas sources. These hoses are intended for
simulation purposes only.
• Keep side flaps on the Transport Bag closed when not in use, to avoid debris from
accumulating inside of bag and on equipment.
To Next Page
Loading...
