ENCORE VENTI Rev. 3 2021-10
27
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
Initial Setup
Front panel
Waste chute
Chute base
4.13 Chute Kit Installation (Optional)
1. Open the brewer’s door and remove the front pannel.
2. Insert the chute base inside the chute hole of the cabinet.
3. Insert the waste chute into the chute base.
4. Renstall the front panel by aligning its metal bracket with the metal bracket fixed on the brew
group assembly.
To Next Page
Loading...
