Cafection Encore VENTI - Stainless Steel Coffee Chute

ENCORE VENTI Rev. 3 2021-10
69
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
7.8.7 Stainless Steel Coffee Chute
Frequency: monthly or every 1,000 cycles
1. Open the door of the machine and remove the front panel.
2. Insert the chute cleaning brush (included with the machine) up to the very end of the
chute.
3. Brush the walls from left to right and up and down.
To avoid damages, make sure the metal portion of the brush does not touch the
walls of the chute.
4. Get the brush out and wipe it clean.
5. Brush the chute a second time by repeating steps2 to 4.
6. Perform a rinse cycle.
7. Reinstall the front panel and close the door.
Cleaning and Sanitizing