ENCORE VENTI Rev. 3 2021-10
65
www.cafection.com 800-561-6162
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
7.8.2 Bean Hopper Plastic Funnel
Frequency: monthly or every 1,000 cycles
1. Open the brewer’s door and remove the plastic top lid (pull it up and then forward).
2. Unlock the latch of the grinder protector and flip it open (see section3.7).
3. Pull the bean hopper forward and then lift it.
4. Clean and sanitize the interior of the plastic funnel under hot water. Air dry it completely
before reinstalling the bean hopper.
5. Order a large coffee to ensure that all parts and switches are working properly.
When removing the hopper, beans will not fall, but this step is easier if the hopper is
empty.
Plastic funnel
Cleaning and Sanitizing
To Next Page
Loading...
