ENCORE VENTI Rev. 3 2021-10
www.cafection.com 800-561-6162
44
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
10. This toggle bar is used to enable or disable Sophia Touchless Solutions contactless ordering (if
applicable). Uncheck the box to remove the QR code on selection screen.
Sophia Touchless Solutions Option
When the Sophia Touchless Solutions option is activated, a QR code is displayed on the machine
screen. By scanning this code with a mobile device, the user can set and order a beverage without
touching the screen. The usual options are available through the mobile interface.
11. This field is used to set the water temperature in the tank, in Fahrenheit. Minimum setting is
150°F, maximum setting is 200°F, and default setting is 200°F.
12. This field is used to set the minimum temperature of the water in the tank, in Fahrenheit. If the
water temperature drops below this setting, the coffee brewer will display an error message
until the temperature rises above this minimum. To disable this feature, set the value to zero (0).
13. This field is used to set the quantity of drinks to be ordered before a customer gets one for
free. To disable this function, set the value to zero (0). It is not recommended to use this feature
if the machine is equipped with an optional printer.
14. This toggle bar is used to enable or disable the Most Popular option. When activated, this
option displays a Most Popular icon over the drink that has been ordered the most, on the
selection screen.
15. This toggle bar is used to enable or disable the cup sensor.
16. This button is used to reset the Settings tab back to factory setting. This action does not affect
the recipes.
17. These buttons are used to discard or save any current modification.
Service Mode
To Next Page
Loading...
