User's Guide — 21
Feed Rate – Based on Cutting Feed and RPM (for Turning)
OO
0.
1. Enter the Feed per Revolution:
.031gT (IPR)
FEED/REV.
0.031 INCH
2. Enter the RPM:
900R
RPM
900.
3. Calculate the Feed Rate:
I
FEED/MINUTE
27.900 INCH
Feed Rate – Based on Cutting Feed and RPM (for Drilling)
OO 0.
1. Enter the Cutting Feed:
4BgT (IPR)
FEED/REV.
0.004 INCH
2. Enter the RPM:
800R
RPM
800.
3. Calculate the Feed Rate:
(cont'd)
To Next Page
Loading...
