Calculated Industries 4088 - Cutting Feed (IPR) Calculations

User's Guide — 31
45 n
ANGLE
(Ө) 45.°
T
FEED/TOOTH
ADJ.
0.024 INCH
T
FEED/MINUTE
24.508 INCH
T
NUMBER OF TEETH
2.
T
RPM
516.
T
RCT. ADJ. FACTOR
1.400
T
LEAD ANGLE ADJ.
1.414
CUTTING FEED – Ipr

advances during one revolution of the spindle, typically





Cutting Feed – Based on Feed per Tooth and # of Teeth


g*
ALL CLEARED 0.
1. Enter the Feed per Tooth:
(cont'd)