Calculated Industries 4088 - Cutting Feed - Based on Feed Rate and RPM

32 — Machinist calc
®
Pro 2
.005T
FEED/TOOTH
0.005 INCH
2. Enter the Number of Teeth:
4gI (#Teeth)
NUMBER OF TEETH
4.
3. Calculate the Cutting Feed:
gT (IPR)
FEED/REV.
0.020 INCH
Cutting Feed – Based on Feed Rate and RPM


OO 0.
1. Enter the Feed Rate:
15I
FEED/MINUTE
15. INCH
2. Enter the Spindle Speed:
800R
RPM
800.
3. Calculate the Cutting Feed:
gT (IPR)
FEED/REV.
0.019 INCH
(cont'd)