Calculated Industries 4088 - Feed Rate - Based on Feed Per Tooth, RPM and # of Teeth

22 — Machinist calc
®
Pro 2
I
FEED/MINUTE
3.200 INCH
Feed Rate – Based on Feed per Tooth, RPM and # of Teeth


RPM: 1000
Feed
Rate
Feed per Tooth:
0.005″
Number
of Teeth: 4
g* ALL CLEARED 0.
1. Enter the Feed per Tooth:
5BT
FEED/TOOTH
0.005 INCH
2. Enter the Number of Teeth:
4gI (#Teeth)
NUMBER OF TEETH
4.
3. Enter the RPM:
1000R
RPM
1000.
4. Calculate the Feed Rate:
I
FEED/MINUTE
20.000 INCH
(cont'd)