User's Guide — 53
1. If necessary, set the Thread Class to 2A:
2gt* (Thread Class)
U.S. EXT. THREAD
2A 2.
* If necessary, continue pressing t until the desired External
Thread Class is displayed.
2. Enter the Thread Size:
.375it
THREAD SIZE
2A 0.375 - INCH
3. Enter the Threads per Inch:
16t
THREAD SIZE
2A 0.375 - 16 INCH
4. Enter the Wire Size**:
.04gS (Wire Size)
STORED WIRE SIZE
0.04 INCH
5. Enter the 3-Wire Measurement:
.3975gR
(3-W Measure
)
3-WIRE MEASURED
0.3975 INCH
6. Find the Pitch Diameter:
R
PITCH DIAMETER
0.332 INCH
R
STORED WIRE SIZE
0.04 INCH
**If no Wire Size is entered, the calculated Ideal Wire Size will be
used to nd the Pitch Diameter.
To Next Page
Loading...
Need help?
General
