Calculated Industries HeavyCalc - Fractional Rounding Settings

Fractional Rounding Settings
[Conv] 1
Fraction set to 1/16
[Conv] 2
Fraction set to 1/2
[Conv] 3
Fraction set to 1/32
[Conv] 4
Fraction set to 1/4
[Conv] 6
Fraction set to 1/64
[Conv] 8
Fraction set to 1/8
[Conv] 7
Fraction set to “Normal Mode” (re d u c e s
to the lowest common denominator).
[Conv] 9
Fraction set to “Fixed Mode” (denomi-
nator value always fixed or remains
the same as fractional setting).
[Conv] [ / ]
Toggles the flashing fraction feature
o n / o f f. The flashing denominator
reflects the current fractional setting.
User’s Guide – 13