Math Operations
Your calculator uses standard chaining
logic. This means that you enter your
first value, the operator (+, –, x, ÷), the
second value, then the (=) sign.
3 [+] 2 [=] 5
3 [–] 2 [=] 1
3 [x] 2 [=] 6
3 [÷] 2 [=] 1.5
This feature also makes it easier to
solve dimensional problems.
Adding Dimensions
Add 7 feet 3-1/2 inches to 11 feet 4 inches:
7 [Feet] 3 [Inch] 1[/] 2 [+]
11 [Feet] 4 [Inch] [=] 18 FT 7-1/2 IN
Add 11 inches to 2 feet 1 inch:
11 [Inch] [+] 2 [Feet] 1 [Inch] [=] 36 IN
Add 2 feet 1 inch to 11 inches:
2 [Feet] 1 [Inch] [+]
11 [Inch] [=] 3 FT 0 IN
Note: The format of the first value you
enter determines the format of the answer.
However, with the [Conv] key you can
change to any format you want, provided
that you maintain convention.
User’s Guide – 19
To Next Page
Loading...
