Paperless Tape Function
The Paperless Tape allows you to re v i e w
the last 20 entries of a calculation. To
access this function pre s s [Rcl] [=].
To review entered values, press [Rcl] [=]
to access the tape mode and then pre s s
the [+] or [ – ] keys to scroll forward or
backward through the entries.
While in the paperless tape mode, the
display will show the entered or calcu-
lated value, along with the sequence
number of entry (e.g., 01, 02, 03, etc.)
and the math operator (+, –, x, ÷, %) in
the upper left corner of the display.
If an equals ([ = ] ) has been used in the
middle of a string and then added to, the
letters S U B (Subtotal) will display in the
upper left. If equals ([ = ] ) was the last
operation perf o rmed, the display will
show T T L ( Total) as the last entry.
To exit the paperless tape mode, pre s s
any key besides [ O ff ], [ + ] , or [ – ] . Exiting
the tape will display the last entry (or
T T L ), and allow you to either exit com-
pletely, or continue using the last tape
value for another operation. For exam-
ple, to store the last value as “ L e n g t h ” ,
p ress any key besides [ O ff ] , [ + ] or [–] a n d
then press [=] [Length].
User’s Guide – 27
To Next Page
Loading...
Need help?
General
