Memory Operation
Whenever using the Memory Function,
the following keys enable you to add,
subtract, and recall values stored in
memory:
[M+] adds the displayed value to Memory.
[Conv] [M+] subtracts the displayed val-
ue from Memory.
[Rcl] [M+] recalls and displays the total
value of the Memory.
[Rcl] [Rcl] displays and clears the Memory.
[Conv] [Rcl] clears memory without
affecting the display.
The Memory can be used with any for-
mat as long as values have the same
convention. The following exerc i s e
shows you how to use the Memory
Function:
22 – HeavyCalc™
To Next Page
Loading...
