Dimension Keys
[Yds]
Yards — This is an entry and conver-
sion key (when used with [Conv]).
The entry can be a whole number or a
decimal number.
[Feet]
This is an entry and conversion key
(when used with [Conv]). The entry
can be in whole or decimal numbers.
This key can also be used in conjunc-
tion with the [Inch] and [/] keys for
entering values in Feet-Inch format.
For example, 6 feet 9-1/2 inches is
entered as follows: 6 [Feet] 9 [Inch] 1
[/] 2. Repeated presses of this key
during conversions will toggle
between Feet-Inch and Decimal Feet
formats.
[Inch]
This is an entry and conversion key.
The entry can be in whole or decimal
numbers. This key can also be used
with the [/] key for entering values in
Fractional Inch format. For example,
enter 9-1/2 inches as: 9 [Inch] 1 [/] 2.
Repeated presses of [Inch] during con-
versions, toggles between Fractional
Inch and Decimal Inch formats.
6 – HeavyCalc™
To Next Page
Loading...
