Dimension Conversions
Note: Before doing the following exercis -
es, make sure the calculator is set to facto -
ry defaults. To do this, press [Conv] [x].
ALL SAMPLEEXERCISESIN THISMANUAL AREBASED
ON DEFAULT VALUES UNLESS OTHERWISE STATED
.
Linear Conversions
Convert 14 feet to other linear dimen-
sions:
Keystrokes Display
[On/C] [On/C] 0.
14 [Feet] . . .
[Conv] [Yds] 4.666667 YD
[Conv] [Feet] 14 FT 0 IN
[Conv] [Inch] 168 IN
[Conv] [mm] 4267.2 MM
[Conv] [m] 4.2672 M
Note: In the last conversion to “mm” the
answer displays as “meters.” This will
occur whenever the answer is beyond the
calculator’s normal 7-digit range.
16 – HeavyCalc™
To Next Page
Loading...
Need help?
General
