CAME BKS08ALS User Manual

p. 21 - Manual FA00442-EN - 12/2017 - © CAME S.p.A. - Translated original instructions
F63 Change COM speed 0 = 1200 Baud / 1 = 2400 Baud / 2 = 4800 Baud / 3 = 9600 Baud / 4 = 14400 Baud / 5 = 19200
Baud / 6 = 38400 Baud (default) / 7 = 57600 Baud / 8 = 115200 Baud
For setting the communication speed used in the CRP (Came Remote Protocol) connection system.
F65 Wireless input RIO-EDGE [T1] OFF (default) / P0 = P0 / P7 = P7 / P8 = P8
RIO-EDGE wireless safety device associated to a function of choice among those available: P0= stop gate and exclude any automatic closing; to
resume movement, use the control device, P7 = reopening during closing, P8 = reclosing during opening.
For programming, see the instructions that come with the accessory.
 This function only appears is the control board has been fi tted with a RIO-CONN card.
F66 Wireless input RIO-EDGE [T2] OFF (default) / P0 = P0 / P7 = P7 / P8 = P8
RIO-EDGE wireless safety device associated to a function of choice among those available: P0= stop gate and exclude any automatic closing; to
resume movement, use the control device, P7 = reopening during closing, P8 = reclosing during opening.
For programming, see the instructions that come with the accessory.
 This function only appears is the control board has been fi tted with a RIO-CONN card.
F67 Wireless input RIO-CELL [T1] OFF (default) / P1 = P1 / P2 marked areas = P2 / P3 = P3 / P4 = P4
RIO-CELL is associated to any function chosen among those available: P1 = reopening during closing; P2 = reclosing during opening; P3 = partial
stop; P4 = obstruction wait.
For programming, see the instructions that come with the accessory.
 This function only appears is the control board has been fi tted with a RIO-CONN card.
F68 Wireless input RIO-CELL [T2] OFF (default) / P1 = P1 / P2 marked areas = P2 / P3 = P3 / P4 = P4
RIO-CELL is associated to any function chosen among those available: P1 = reopening during closing; P2 = reclosing during opening; P3 = partial
stop; P4 = obstruction wait.
For programming, see the instructions that come with the accessory.
 This function only appears is the control board has been fi tted with a RIO-CONN card.
F71 Partial opening time 5 = 5 seconds (default) /....... / 40 = 40 seconds
After an opening command from the button connected to 2-3P, the gate opens for an adjustable time of between fi ve seconds and 40 seconds.
U 1 Entering a user 1 = Step-step command (open-close) / 2 = Sequential command (open-stop-close-stop) / 3 = Open
only command / 4 = Partial opening command
Entering up to 250 users and associating to each one a function of choice among those included. This must be done via transmitter or other control
device (see "ENTERING USERS WITH ASSOCIATED COMMAND paragraph).
U 2 Deleting a user
Deleting a single user
U 3 Deleting users OFF (default) / ON = Delete all users
Deleting all users.
U4 Code decoding 1 (default) / 2 / 3
For choosing the type of receiving control code: 1= all series / 2 = only
Rolling Code series / 3 = only TWIN series
⚠ When you select a radio code, all saved transmitters will automatically be deleted.
 The TWIN code lets you save multiple users with the same key, that is, key block.
A 4 Resetting parameters OFF (default) / ON
Attention! The default settings will be restored.
A 5 Counting maneuvers Number of maneuvers done
For viewing the number of maneuvers completed or for deleting them (001 = 100 maneuvers; 010 = 1,000 maneuvers; 100 = 10,000 maneuvers;
999 = 99,900 maneuvers; CSI = maintenance job)
H1 Version
View the fi rmware version.

CAME BKS08ALS Specifications

General

Brand	CAME
Model	BKS08ALS
Category	Gate Opener
Language	English