Page 2 - Manual FB00942-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
General warnings
• Read the instructions carefully before starting installation and proceed as specified by
the manufacturer.
• Installation, programming, commissioning and maintenance of the product must only be
performed by qualified technicians who have been properly trained in compliance with
current standards, including health and safety and packaging disposal regulations.
• The installer must check that the information for users, where applicable, is present and
handed over.
• Before performing any cleaning or maintenance operation, disconnect the power supply
to the devices.
• The units must only be used for the purpose for which they were explicitly designed.
• The manufacturer declines all liability for any damage as a result of improper, incorrect
or unreasonable use.
• Caution: risk of explosion if the batteries are replaced with others of an incorrect type.
• Once flat, the batteries must not be thrown away with household waste but separated
and recycled correctly.
DISPOSAL - Make sure the packaging is disposed of according to the regulations in force
in the country where the product is used.
Dispose of the device properly at the end of its life cycle. The equipment must be disposed
of in compliance with the regulations in force, recycling its component parts wherever
possible. Components that qualify as recyclable waste bear the relevant symbol and the
material’s abbreviation.
Regulatory references - The product complies with the applicable reference directives.
To Next Page
Loading...
Need help?
General
