CAME BPT TA/350 User Manual

TA350
I
G
H
Page 23 - Manual FB00942-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Resetting the device
Malfunctioning, interventions and other
technical reasons may require the device
to be reset.
Pull out the unit body.
Press button R I.
This operation does NOT erase any customised programs, which will be restored, along
with the other data, when the device is restarted.
Factory reset
To restore all the factory settings, press the + + buttons at the same time and then
press button R.
Use the
buttons to choose one of the 2
possible magnetic configurations E.
= Contact enabled
= Contact not enabled
After a few seconds of inactivity, the choice
made is recorded.
If an enabled contact is opened (
),
the activation is displayed as shown in fig
-
ure H.

CAME BPT TA/350 Specifications

General

Brand	CAME
Model	BPT TA/350
Category	Thermostat
Language	English