D
E
F
G
Page 15 - Manual FB00942-EN - ver. 1 - 11/2017 - © CAME S.p.A. - The contents of this manual are subject to change at any time without prior notice.
Changing the user profile
The device is able to manage the tempera-
ture preferences of two user profiles.
For each user profile, several programs can
be created - "Comfort", "Eco", "Night" mode
for heating and cooling modes.
To change the active user, press the but
-
ton
Changing the pre-programmed temperature levels
Select the user profile and operating mode
for which you want to customise the tem
-
perature level.
Pull out the unit body.
Make sure that the symbol for the heating
or cooling program is active.
Press button P.
The display shows the name of the program
you are about to edit E.
Use the
buttons F to edit the desired
programmed temperature.
Press button P to confirm the value of the
temperature shown on the display and move
on to editing the next program G.
Edit the remaining programs and press
button P to end programming.
The display flashes for 2 seconds to confirm
that the changes have been successful.
In any case, after 10 seconds of inactiv
-
ity, the device will exit the programming
procedure, considering the data set as valid.
To Next Page
Loading...
Need help?
General
